Sydney Boat Registration Stickers & Rego Numbers
Custom marine-grade ORAFOL vinyl rego stickers for boats and jet skis — designed online, made in Australia, shipped fast.
From the heads at Manly to the upper reaches of the Hawkesbury, Sydney boaters know that crisp, legible registration numbers are not optional — they are what NSW Maritime looks for when or NSW Police conduct on-water checks in Sydney Harbour, Botany Bay or along the Parramatta River. Whether you trailer out of Rose Bay, launch at Cabramatta Bay for a run up Middle Harbour, or keep a tinny on the Georges River, your rego stickers need to survive salt spray, summer UV and the occasional wake from a passing ferry.
Boat Rego Stickers makes it easy to order Sydney boat registration stickers online. Choose your registration number, pick a colour that contrasts with your hull, and we cut each pair from premium ORAFOL marine-grade vinyl right here in Australia. Every set is sized to published Transport for NSW heights — typically 150mm characters for boats and 100mm for personal watercraft — with fast shipping to Sydney metro and greater NSW. Design in minutes, peel, apply and get back on the water with confidence.
Sydney Waterways We Serve
Built for the conditions on Sydney's most popular boating and PWC waterways.
Popular waterways
- Sydney Harbour
- Parramatta River
- Botany Bay
- Hawkesbury River
Boat ramps & launch points
- Rose Bay Boat Ramp
- Cabramatta Bay Boat Ramp
- Akuna Bay Public Boat Ramp
Boat Rego Stickers Sydney
Sydney's mix of harbour chop, open-water swell off the heads and flat-water runs on the Parramatta River means your boat registration stickers Sydney skippers rely on must stay sharp season after season. Our boat rego pairs are cut to published Transport for NSW heights, with bold block characters that remain readable from a distance — exactly what inspectors expect when they pull alongside in Sydney Harbour or Botany Bay.
Dark hulls, white fibreglass and coloured aluminium all need different contrast choices. Use our online designer to preview black-on-white, white-on-navy or custom colour combinations before you order. Each sticker ships as a matched port-and-starboard set, ready to apply above the waterline on both sides of your vessel.
150mm × 580mm
$69.99 per pair
200mm × 580mm
$79.99 per pair
250mm × 750mm
$99.99 per pair
300mm × 1000mm
$119.99 per pair
Jetski Rego Stickers Sydney
Personal watercraft are everywhere on Sydney's waterways — from the calm mornings on Pittwater to busy summer afternoons around Clarke Island and the Harbour Bridge. Jetski rego stickers Sydney riders need must meet the 100mm character height set by Service NSW and stay firmly bonded despite constant spray and high-speed vibration.
Our PWC sets use the same ORAFOL marine vinyl as our boat ranges, with adhesive formulated for fibreglass, gelcoat and plastic cowlings. Design your registration number online, select a contrasting colour, and we dispatch within 1–3 business days so you can get back out on the Harbour or Hawkesbury without delay.
100mm × 300mm
$54.99 per pair
100mm × 350mm
$59.99 per pair
125mm × 450mm
$64.99 per pair
150mm × 580mm
$69.99 per pair
Custom Boat Lettering Sydney
Want your vessel to look as good as it performs on Sydney Harbour? Pair published-height rego numbers with custom boat name lettering cut from matching marine-grade vinyl. From classic serif names on a timber runabout to bold modern fonts on a centre-console, our boat lettering stands up to Sydney's salt, sun and busy ramp life — and ships fast to addresses across the harbour city.
New South Wales Registration Marking Rules
Requirements for Sydney boaters under Transport for NSW (Maritime).
Transport for NSW (Maritime) — Registration Marking Requirements:
Under NSW law administered by Service NSW, registration numbers must appear on both sides of your vessel in uppercase characters of approved size and contrasting colour. NSW Maritime and NSW Police regularly patrol Sydney Harbour, Botany Bay and the Hawkesbury, Check Transport for NSW for current display rules — we manufacture vinyl, we do not certify vessels.
- Registered vessels: Minimum ~150mm character height
- Personal watercraft (PWC): Minimum ~100mm character height
- Placement: Registration number on both sides of the hull
- Visibility: Clearly visible above the waterline
- Lettering: Uppercase letters and numerals in a contrasting colour
We size vinyl to published Transport for NSW character heights. Always check Transport for NSW (Maritime) for current rules. See the New South Wales display guide
View full New South Wales boat rego range · New South Wales jetski rego stickers
Shipping to Sydney & Surrounding Suburbs
We dispatch Australia-wide within 1–3 business days via standard Australia Post services.
Popular delivery areas:
Sydney Boat Rego FAQs
Published Transport for NSW heights are typically 150mm for registered boats and 100mm for PWCs. We cut vinyl to those sizes; check Transport for NSW / Service NSW. We are not a government agency and products are not government-certified.
We dispatch most orders within 1–3 business days via Australia Post. Sydney metro deliveries typically arrive within a few days of dispatch, with tracking provided so you can plan your installation before your next harbour or river trip.
Service NSW requires registration numbers on both sides of the hull, clearly visible above the waterline when the boat is at rest. On Sydney Harbour cruisers and runabouts, the forward half of the hull — well clear of rub rails and fender marks — is the standard placement spot checked by NSW Maritime patrols.
Absolutely. Our 100mm PWC sets are built for the conditions Hawkesbury riders face — fresh and salt water, long summer days and trailer transport from suburbs like Penrith and Windsor. Design your number online and we ship directly to your Sydney or Hawkesbury address.
Order Your Sydney Boat Rego Stickers Today
Marine-grade ORAFOL vinyl, made in Australia. Design online and get your rego numbers delivered fast.