Melbourne Boat Registration Stickers & Rego Numbers
Custom marine-grade ORAFOL vinyl rego stickers for boats and jet skis — designed online, made in Australia, shipped fast.
Melbourne boating is defined by Port Phillip Bay — wide, often windy, and busy with everything from trailer-sailers out of Williamstown to cabin cruisers moored at St Kilda Marina. Add the Yarra River, Patterson River and the Maribyrnong, and you have a metro area where thousands of Victorians rely on clearly displayed registration numbers every weekend. VicRoads and Safe Transport Victoria publish character heights and contrast rules, and Water Police do not hesitate to pull up vessels with faded or undersized stickers during patrols from Sandringham to Frankston.
Boat Rego Stickers produces Melbourne boat registration stickers from ORAFOL marine-grade vinyl, cut to published Marine Safety Victoria 150mm boat and 100mm PWC heights. Design your number online, pick colours that pop against your hull, and we ship fast to bayside suburbs, the Mornington Peninsula gateway and greater Melbourne. Australian-made, built for bay chop and southern UV, ready to install before your next run across the rip or up the Yarra.
Whether you keep a tinny on a trailer in Williamstown or run a larger vessel out of Patterson Lakes, our port-and-starboard sets arrive ready to apply — no trimming, no guesswork, just numbers sized to published heights that last through a full Victorian boating season.
Melbourne Waterways We Serve
Built for the conditions on Melbourne's most popular boating and PWC waterways.
Popular waterways
- Port Phillip Bay
- Yarra River
- Patterson River
- Maribyrnong River
Boat ramps & launch points
- St Kilda Marina Boat Ramp
- Williamstown Boat Ramp
- Patterson Lakes Boat Ramp
Boat Rego Stickers Melbourne
Port Phillip Bay demands registration numbers that stay legible in glare, chop and overcast Melbourne conditions alike. Our boat registration stickers Melbourne boaters trust are cut to published Marine Safety Victoria 150mm character heights, with sharp block numerals visible from the distance Water Police typically inspect from.
Whether your boat lives on a trailer in Sandringham or launches from Williamstown for a bay crossing, you receive a matched port-and-starboard set ready to apply above the waterline. Preview contrast against dark, white and coloured hulls in our online designer before you commit.
150mm × 580mm
$69.99 per pair
200mm × 580mm
$79.99 per pair
250mm × 750mm
$99.99 per pair
300mm × 1000mm
$119.99 per pair
Jetski Rego Stickers Melbourne
Personal watercraft are popular across Port Phillip Bay — from summer sessions off Frankston to flat-water runs near the mouth of the Yarra. Jetski rego stickers Melbourne PWC owners need must meet Victoria's 100mm height rule and stay bonded through bay swell, trailer transport and cold-water launches.
Our jetski sets use ORAFOL marine vinyl with adhesive suited to fibreglass and plastic cowlings. Design online, select a high-contrast colour for your hull, and we dispatch within 1–3 business days to Melbourne metro and bayside addresses across Victoria.
100mm × 300mm
$54.99 per pair
100mm × 350mm
$59.99 per pair
125mm × 450mm
$64.99 per pair
150mm × 580mm
$69.99 per pair
Custom Boat Lettering Melbourne
A custom boat name across the transom turns heads at St Kilda Marina and Williamstown alike. Our custom boat lettering Melbourne owners order is cut from the same ORAFOL marine-grade vinyl as our rego sets — built for Port Phillip Bay salt, bay wind and long summer days on the water. Pair your name decal with published-height rego numbers for a finished, professional look.
Victoria Registration Marking Rules
Requirements for Melbourne boaters under Marine Safety Victoria.
Marine Safety Victoria — Registration Marking Requirements:
Victorian registration rules enforced by VicRoads and Safe Transport Victoria require uppercase registration numbers on both sides of the hull, clearly visible above the waterline. Victoria Police Water Police patrol Port Phillip Bay, the Yarra and Patterson River regularly, especially during peak boating season and major bay events.
- Registered vessels: Minimum ~150mm character height
- Personal watercraft (PWC): Minimum ~100mm character height
- Placement: Registration number on both sides of the hull
- Visibility: Clearly visible above the waterline
- Lettering: Uppercase letters and numerals in a contrasting colour
We size vinyl to published Marine Safety Victoria character heights. Always check Marine Safety Victoria for current rules. See the Victoria display guide
View full Victoria boat rego range · Victoria jetski rego stickers
Shipping to Melbourne & Surrounding Suburbs
We dispatch Australia-wide within 1–3 business days via standard Australia Post services.
Popular delivery areas:
Melbourne Boat Rego FAQs
Published Marine Safety Victoria heights are typically 150mm for registered boats and 100mm for PWCs. We cut vinyl to those sizes; check Marine Safety Victoria. We are not a government agency.
Orders dispatch within 1–3 business days via Australia Post. Melbourne metro and bayside deliveries to suburbs like St Kilda, Williamstown and Sandringham typically arrive within a few days of dispatch, with tracking included.
Our ORAFOL marine-grade vinyl is formulated for salt water, UV and the temperature swings Melbourne bay boaters experience. Whether you launch from Williamstown or Patterson Lakes, the adhesive and face stock are chosen to last through a full Victorian boating season.
Absolutely. We ship directly to Melbourne addresses including marina pickup points and residential addresses across the inner south. Design your registration number online and we will cut and dispatch your set ready for installation on your bay boat or runabout.
Order Your Melbourne Boat Rego Stickers Today
Marine-grade ORAFOL vinyl, made in Australia. Design online and get your rego numbers delivered fast.