Skip to main content
Cairns, Queensland

Cairns Boat Registration Stickers & Rego Numbers

Custom marine-grade ORAFOL vinyl rego stickers for boats and jet skis — designed online, made in Australia, shipped fast.

Design Boat Rego Design Jetski Rego
Fast Australia-Wide Shipping
Premium ORAFOL Marine Vinyl
Made in Australia

Cairns is gateway country — reef runs from Trinity Inlet, barra sessions on the Barron, and croc-country estuaries to the north. Tropical heat, intense UV and constant salt mean your rego numbers need to be tough. We produce Cairns boat registration stickers on ORAFOL marine-grade vinyl, sized to published MSQ heights and shipped fast across Far North Queensland.

Whether you run a reef charter from Marlin Marina or trailer from Holloways Beach, peeling numbers are a problem when MSQ patrols the inlet. Design online and we will dispatch within 1–3 business days to Cairns, Palm Cove and surrounds.

Local waterways

Cairns Waterways We Serve

Built for the conditions on Cairns's most popular boating and PWC waterways.

Popular waterways

  • Trinity Inlet and Cairns Harbour
  • Barron River
  • Trinity Bay and offshore reef waters
  • Mulgrave and Russell Rivers

Boat ramps & launch points

  • Fisherman's Wharf Boat Ramp
  • Holloways Beach Boat Ramp
  • Yorkeys Knob Boat Ramp
Boat registration

Boat Rego Stickers Cairns

Cairns boat registration stickers follow MSQ s37 — 150mm on planing ships other than PWC, 100mm on PWC, 75mm on all other ships (both sides or the stern), readable from about 30 metres. Check MSQ for your class.

Far North Queensland sun fades cheap vinyl within a season — ORAFOL marine stock holds up on moored vessels and daily charter workboats alike.

150mm × 580mm

$69.99 per pair

200mm × 580mm

$79.99 per pair

250mm × 750mm

$99.99 per pair

300mm × 1000mm

$119.99 per pair

Boat sizes from 150mm character height for registered vessels. Each order includes one pair (both sides). Correct display also requires contrasting colour, placement and visibility under Maritime Safety Queensland rules — see full requirements.
Design Your Cairns Boat Rego Stickers
Personal watercraft

Jetski Rego Stickers Cairns

PWC riders around Yorkeys Knob and Trinity Inlet need 100mm jetski rego stickers that survive tropical humidity and salt. Our sized to published MSQ heights jetski presets on ORAFOL vinyl are cut for curved Sea-Doo and Yamaha panels common on FNQ waterways.

Order before wet season peaks — ramp queues move faster when your numbers are already sorted.

100mm × 300mm

$54.99 per pair

100mm × 350mm

$59.99 per pair

125mm × 450mm

$64.99 per pair

150mm × 580mm

$69.99 per pair

PWC sizes from 100mm character height. Each order includes one pair (both sides).
Design Your Cairns Jetski Rego Stickers
Boat names

Custom Boat Lettering Cairns

Custom boat lettering Cairns skippers put on reef and estuary vessels needs to handle tropical humidity and Far North UV. Our boat name stickers are cut from the same ORAFOL marine vinyl as our MSQ rego sets — whether you moor in Trinity Inlet or launch at Yorkeys Knob. Pair a name decal with numbers sized to published heights for a finished FNQ look.

Design Boat Name Stickers
Legal requirements

Queensland Registration Marking Rules

Requirements for Cairns boaters under Maritime Safety Queensland.

Important: Registration numbers should match published Maritime Safety Queensland heights and contrast rules. Check the authority before you apply — we manufacture vinyl lettering; we do not certify vessels.

Maritime Safety Queensland — Registration Marking Requirements:

Maritime Safety Queensland monitors Trinity Inlet, Cairns Harbour and offshore reef transit zones. MSQ registration display rules apply to all Queensland registered vessels operating in Far North Queensland waters.

  • Planing ships other than PWC: Minimum 150mm character height, both sides (s37)
  • Personal watercraft (PWC): Minimum 100mm character height, both sides
  • All other ships: Minimum 75mm, both sides or on the stern
  • Visibility: Above the waterline, contrast, readable from about 30 metres
  • Lettering: Uppercase letters and numerals in a contrasting colour

We size vinyl to published MSQ character heights. Always check Maritime Safety Queensland for current rules. See the Queensland display guide

View full Queensland boat rego range · Queensland jetski rego stickers

Delivery

Shipping to Cairns & Surrounding Suburbs

We dispatch Australia-wide within 1–3 business days via standard Australia Post services.

Popular delivery areas:

Smithfield Edge Hill Palm Cove Redlynch Machans Beach
FAQ

Cairns Boat Rego FAQs

Yes. Our presets use 150mm characters for boats and 100mm for PWCs — matching Maritime Safety Queensland requirements.

ORAFOL marine vinyl is designed for UV and salt exposure — critical in Far North Queensland where cheap stickers fail quickly.

We deliver Australia-wide including Cairns, Palm Cove, Smithfield and all FNQ addresses. Dispatch is typically 1–3 business days.

Same MSQ 150mm sizing applies to offshore vessels. Our marine vinyl handles the salt and sun of daily inlet-to-reef transits.

Yes — many FNQ operators use our ORAFOL sets for published-height rego display. Design online with your registered number and we ship matched pairs.

Order Your Cairns Boat Rego Stickers Today

Marine-grade ORAFOL vinyl, made in Australia. Design online and get your rego numbers delivered fast.

Boat Rego Designer Jetski Rego Designer